Before PCBA is shipped, special PCBA packaging is required to prevent damage during transportation and ensure that the PCBA board finally delivered to the customer is in good condition. Next, I would like to talk to you about some requirements of PCBA shipping package.
1, moisture requirements
Before packaging, PCBA shall be cleaned and dried on the surface, and sprayed with three anti-paint. The packaging site shall be clean, and the temperature and humidity shall comply with the relevant regulations of PCBA.
2. Anti-static packaging
Static electricity has long been a killer of chips in PCBA boards. Because static electricity is invisible, invisible and easy to produce, many chips are broken by static electricity. In PCBA packaging, anti-static packaging must be carried out. Antistatic packaging materials are: bubble bags, pearl cotton, electrostatic bags and vacuum bags.
Requirements for the placement of anti-static bags:
As far as possible, one of the components should be close to each other, no more than 2 pcbas.
3. Shock-proof packaging
Place the packaged PCBA board into the box with anti-static effect, place vertically, stack upward not more than two layers, and prevent the partition in the middle, keep it fixed, and prevent shaking.
After PCBA packaging is completed, appropriate labels such as light, upward and moisture-proof shall be printed on the outside of the packing box.